TMOwner’s Manual h © 2008-2012 TurboChef Technologies, Inc.
2SPECIFICATION AND INSTALLATION6.0”(152 mm)6.0”(152 mm)48.3” (1227 mm)41.7”(1059 mm)24.0” (610 mm)4.0”(102 mm)8.5”(216 mm)17.0”(432 mm)41.7” (1059 mm)
3SPECIFICATION AND INSTALLATIONPackagingAll ovens are packaged in a double-wall corrugated box with integrated wooden skids. All international ovens s
4SPECIFICATION AND INSTALLATIONProper placement of the oven will enhance long-term operator convenience and satisfactory performance. Be sure to plac
5CLEANING = Wash, rinse, sanitize. (Use only TurboChef- approved cleaner, part number 103180). = Completely dry with clean towel.IDLEBACKOFFEM
6CLEANINGWARNING: Always disconnect power before cleaning or servicing oven. IDLEBACKOFFEMERGENCY STOP High h Conveyorby TurboChefTMIDLEBACKOFFEMERG
7CLEANING1.2.3.4.5.Step 3: Remove Inner Oven Components122112112.4.Step 4: Clean Oven Components1.3.5.6.7.Replace lters if damaged or torn.
8CLEANING1.2.3.4.Step 5: Replace Oven Components122126.7.8.9.5.LatchStep 7: Ready the Oven for Use1.2.Step 6: Verify Chain TensionAcceptable - Chain (
9STANDARD OVEN OPERATIONOven Controls Figure 12.1. DisplayThe display shows current oven operation and/or user programming information. 2. Soft Ke
10STANDARD OVEN OPERATIONCookingFigure 13.This section explains how to cook a food product by describing the “standard operation” modes through which
11STANDARD OVEN OPERATIONMode 3: WarmingMode during which the oven warms to the preset cooking temperature defined by the cooking profile that was sel
12STANDARD OVEN OPERATIONEditing a Cooking ProfileTo edit a cooking profile, the oven must be in the and the full edit or flex option mus
13STANDARD OVEN OPERATIONAdjusting the Belt SpeedThe oven can accommodate either one or two con-veyor belts. The oven will automatically detect the nu
14OVEN MODESINSERT SMART CARDPRESS [BACK] TO EXITSMARTCARDFAULTSCONFIG MENUSETUPTEST MODEFigure 16: Config ModeLOAD FROM CARDSMARTCARDSAVE TO CARDFigu
15OVEN MODESEC=82F 208VRUN: 65432 HRIDLE: 12345 HRINFOSERIAL_NUMBERSOFTWARE VERSIONFigure 24: Info ScreenDEGS FBELT L-REDIT/RIGID/FLEXENGLISHSETUP ME
16OVEN MODESInfo ScreenThe info screen (Figure 24, page 15) is used to display the following information in an easy to access place: - Serial number
17TROUBLESHOOTINGIssue Possible Cause(s) ResolutionNo power to oven. - Oven is not plugged in. - Main circuit breaker is tripped. - Plug ov
18TROUBLESHOOTINGIssue Possible Cause(s) ResolutionF2: Low Temp During Cook - Oven power interrupted. - Excessive load. - Oven is not clean. -
19TROUBLESHOOTINGReplaceable PartsThe following is a list of parts that may need replacing during the life of the oven. For more information, please c
20NORTH AMERICA LIMITED WARRANTYNorth America Limited Warrantye Limited Warranty outlined below for the TurboChef conveyor oven (model HhC 2020 or Hh
21NORTH AMERICA LIMITED WARRANTYModications and Repair: Equipment that has been modied or altered by persons other than TurboChef or its service age
For further information, call800.90TURBOor+1 214.379.6000
22NORTH AMERICA LIMITED WARRANTYpay such invoice based on terms of net 10 days. Customer also agrees to pay any cost incurred by TurboChef or its serv
23INTERNATIONAL LIMITED WARRANTYInternational Limited Warrantyis Limited Warranty shall apply to the sales of all TurboChef HhC 2020 or HhC 2620 Conv
24INTERNATIONAL LIMITED WARRANTYWarranty ServiceDuring the Warranty Period, any materially defective Equipment will be repaired or replaced free of ch
25INTERNATIONAL LIMITED WARRANTYe claim must include the serial number of the Equipment and be received by TurboChef on or before the last day of the
26INTERNATIONAL LIMITED WARRANTYGoverning Law, Entire, Agreement: is Limited Warranty shall be governed by and construed according to English law. e
27INTERNATIONAL LIMITED WARRANTY
Part Number: HCT-4201 / Rev. K / November 2012Country Code: NA/EUFor service or information: Customer Support at 1-800-90
The information contained in this manual is important for the proper installation, use, maintenance, and repair of this oven. Follow these procedures
Table of ContentsSafety InformationImportant Safety Information - Please Read First iGeneral Safety Information iReducing Fire Risk iiPreventing Ov
Oven ModesConfig Mode 14Smart Card Screen (Loading a Menu) 14Accessing the Fault Count Screen 14 Accessing the Setup Mode 14 Setup Mode 14Cha
iSAFETY INFORMATIONImportant Safety Information – Please Read FirstImproper installation, adjustment, alteration, service, or maintenance of this equi
iiSAFETY INFORMATIONReducing Fire RiskIf materials inside the oven ignite or if smoke is observed,1. Turn off the oven.2. Disconnect the power cord or
1SPECIFICATION AND INSTALLATIONHhC 2020 DimensionsExteriorHeight 13.0” (330 mm)--with legs 17.0” (432 mm)Width 48.3” (1227 mm)Depth
Comments to this Manuals