Turbochef-technologies TurboChef High h Conveyor 2020 User Manual download pdf (Page 19)

STANDARD OVEN OPERATION

Mode 3: Warming

Mode during which the oven warms to the preset

cooking temperature defined by the cooking profile

that was selected.

Happens When...

- A selection is made from  2, and the oven’s

temperature at the beginning of warmup was not

within (less than) 25°F (14°C) of the oven’s set

temperature.

Goes To...

-  4 once the oven has reached the temperature

defined by the selected cooking profile.

-  6 when the user presses the back/off key

and the oven is above 150°F (66°C).

Mode 4: Soaking

Mode during which the oven has completed

warming up and automatically allows an additional

five minutes for the oven cavity surfaces to warm.

Happens When...

-  3 completes (within 5°F [3°C] of set point)

Goes To...

-  5 when soaking completes.

-  6 when the user presses the back/off key and

the oven is above 150°F (66°C).

Mode 5: Cooking

Mode during which the oven is ready to cook. The

user can place food on the conveyor to cook, or edit

cook settings if the full edit or flex option is enabled.

See page 12 for more information on full edit and

flex options.

Happens When...

-  4 completes.

- The user presses the idle key, up key, down

key, or any soft key during  7.

Goes To...

-  6 when the user presses the back/off key.

-  7 when the user presses the idle key.

-  3 if the temperature drops 25°F (14°C)

or more below the set point.

Mode 6: Cooling Down

Mode during which the burner assembly shuts off to

allow the oven to cool.

Happens When...

- The user presses the back/off key from  3

(and the oven temperature is above 150°F [66°C]),

or from  4, 5, or 7.

Goes To...

-  1 when the oven temperature has receded

below 150°F (66°C).

-  2 when the user selects a cooking profile.

Mode 7: Idle

Mode during which both blowers are reduced to

30% and the belt speed reduces to 15 minutes to

save power. All other oven components remain the

same.

If the Idle key is pressed once, a timer begins that

is twice as long as the longest belt speed time in the

menu (not necessarily the one currently selected to

cook), after which the oven goes into Idle mode.

To immediately enter Idle mode, press the Idle key

twice.

Happens When...

-The user presses the idle key from  5.

Goes To...

- 5 when the user presses the idle key, up

key, down key, or any soft key.

- 6 when the user presses the back/off key.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Comments to this Manuals

No comments

Turbochef-technologies TurboChef High h Conveyor 2020 User Manual Page 19

Comments to this Manuals

Related products and manuals for Convection ovens Turbochef-technologies TurboChef High h Conveyor 2020