Turbochef-technologies TurboChef User Manual download pdf (Page 27)

To change the cook cavity temperature (CCSP),

press the UP and DOWN keys. Temperature ranges

vary depending on software. Once you have selected

the correct temperature, press the

ENTER key to con-

firm and advance to the next screen

Altering a Recipe

Most

NGC (Tornado) oven models contain 128

unique recipes. The display shows two (2) pages each

with eight (

8) recipe groups. Each recipe group con-

tains eight (

8) recipes. See Figures 11 and 12.

To alter a recipe:

1. Enter the

EDIT MODE (see page 16).

2. Enter the access code “9” and set the CCSP. The

screen displays the first set of eight (8) recipe

groups. To access the second set of eight (8)

recipe groups, press either the

UP or DOWN key.

3. Select the recipe group that contains the individ-

ual recipe you wish to alter. Select the recipe you

wish to alter by pressing the soft key correspon-

ding to the recipe item. Figures 11 and 12.

4. Use the

UP and DOWN keys to navigate through

the recipe settings. Use the keypad and

ENTER key

to alter any of the following three (3) parameters

(see Figure 13):

a. Cook time

Total duration of the cook cycle. Enter the

desired time and press

ENTER.

b. IR element temperature (IRSP)

The temperature the lower radiant element

will maintain during the entire cook cycle.

Valid temperatures are between 500

F (260

and 1150

F (621

C).

c. Events 1…6

Use the keypad and

ENTER key to enter values

for %

TIME, % AIR, and % WAV.



Sum of % TIME for all events must = 100.

The operating system will not allow a

combination of events not equal to 100%.



The % AIR parameter is valid between 10

and 100%.



The % WAV (microwave) parameter is valid

between 0 and 100%.

5. After making changes, test the recipe by

pressing the

TEST soft key. Once the oven has

warmed to the CC set point, press the

TEST

soft key again to begin the test cook.

6. Once satisfied with the recipe, press

SAVE to

permanently store changes.

7. Press the

BACK key until exited from EDIT MODE.

GROUP A

EDIT GROUPS

GROUP B

GROUP C

GROUP D

GROUP E

GROUP F

GROUP G

GROUP H

ITEM 1

GROUP A

ITEM 2

ITEM 3

ITEM 4

ITEM 5

ITEM 6

ITEM 7

ITEM 8

< GROUP 1 >

SAVE

TEST

ITEM 1

COUNT

COOK TIME

IR SETPT

%TIME %AIR %WAV

1 XXX

2 XXX

3 XXX

4 XXX

5 XXX

6 XXX

XXX

00:00

500

FIGURE 11: Select Group

FIGURE 12: Select Recipe FIGURE 13: Edit Recipe Settings

THE CONTROL SYSTEM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 93 94

Comments to this Manuals

No comments

Turbochef-technologies TurboChef User Manual Page 27

Comments to this Manuals

Related products and manuals for Microwaves Turbochef-technologies TurboChef