Turbochef-technologies TurboChef User Manual download pdf (Page 48)

The proper fit and adjustment of the oven door is

essential for safe and reliable operation of the NGC

(Tornado) oven.

The oven door provides three primary functions:

1. To protect the operator from the hot

convection airflow.

2. To protect the operator from exposure to

microwave energy.

3. To actuate the interlock switches.

REMOVING/REINSTALLING THE OVEN DOOR

To remove or reinstall the oven door, follow the

steps below. Refer to Figure 26.

1. Ensure the oven has cooled.

2. Open the oven door to its full open position.

Locate the two (2) thru holes in the bottom of

the left and right hinge assemblies. Insert a screw

or nail into the holes to keep the hinges open

while removing the oven door.

3. Locate and remove the #38 screws (3 each side).

4. Remove the plastic caps.

NOTE: The 10x32 screws do not need to be

removed, as they are used for adjusting the door.

5. Remove the oven door by pulling the door away

from the oven. It will slide off the hinges.

OVEN DOOR PARTS

Figure 26

38. 102809 #8-32 x 3/8” PFH CSK

39. NGC-3067 Assy, Oven Door (Traditional)

NGC-3067-2 Assy, Oven Door (SBK)

40. NGC-1061 Hinge Block

41. 102804 Right Hinge

42. 102805 Left Hinge

43. 101381 #10-32 x 1/2” Hex SS

44. 102140 #10 Flat

45. 102350 #10 Split Lock

46. 101191 Cap, Hole

FIGURE 26: Oven Door Removal & Parts

THE OVEN DOOR

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 93 94

No comments

Turbochef-technologies TurboChef User Manual Page 48