Turbochef-technologies TurboChef User Manual download pdf (Page 56)

SHUNT CAVITY/PLATE

Tightening Sequence

SHUNT ASSY/DOOR COVER

Tightening Sequence

84159

10 6237

16623717

FIGURE 36: Oven Door Assembly: Tightening Specs

Critical Adjustment Notes (Figure 35)

1. Orient with the gasket seam at the bottom of

the door assembly. Gasket should be straight

with no twists or pinching.

2. Attach insulation (Item 94) to the inside of the

door cover using aluminum tape (Item 98).



DO NOT block openings at bottom.

3. Item 94 (insulation) not shown for clarity.

4. Door should be flat without twisting or

warpage after tightening all hardware.

5. Refer to the chart to the right for torque specs.

Refer to Figure 36, above, for tightening

sequences.

6. Attach Item 99 with adhesive backing using

the two locating holes on the front cover.

PART TORQUE

VALUE

90. Bolt, 1/4”-20 x 1.00 80 In-Lbs

(9.04 Nm)

85. Nut, Keps #8-32

(Assembled by factory)

21 In-Lbs

(2.37 Nm)

96. Screw, 8-32 x 3/8”

Torx Security

21 In-Lbs

(2.37 Nm)

97. Screw, 8 x 1/2” PTH

21 In-Lbs

(2.37 Nm)

SCREW TORQUE CHART

Refer to Figures 35, 36.

THE OVEN DOOR

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 93 94

No comments

Turbochef-technologies TurboChef User Manual Page 56